Siirry sisältöön
Fabrication Material processing

Solution-processible perovskite solar cell fabrication

Glove box

Two nitrogen-filled glove boxes (<0.1 ppm water, <0.1 ppm oxygen) equipped with spin coaters, balances, and hot plates for processing samples in solution, and two Schlenk line setups equipped with high vacuum pumps and nitrogen lines for the synthesis of colloidal nanocrystals and organic materials.

Details

Location: Tampere University (TAU), Tampere
Contact person: Suvi Lehtimäki (Tampere)
Info:
  • Two nitrogen-filled glove boxes (<0.1 ppm water, <0.1 ppm oxygen) equipped with spin coaters, balances, and hot plates for processing samples in solution. A spin-coater from Laurell technologies (model WS-400-6NPPB) with a 1.75″ (45 mm) diameter vacuum chuck for film processing in the air, with auto-execute process recipes, including run time and acceleration rate (manual operation also possible). A thermal evaporator with high and low temperature sources for depositing metals and organic materials. Two HARRY GESTIGKEIT GMBH programmable thermal ovens for high-temperature annealing (in air), up to 600 °C. Plate size280x200 mm, with cover.
  • Two Schlenk line setups equipped with high vacuum pumps and nitrogen lines for the synthesis of colloidal nanocrystals and organic materials. Digital thermometers for precise temperature control and real-time temperature readings. A centrifuge (up to 10000 rpm) for nanocrystal purification.

Send an enquiry

"*" indicates required fields

Hidden
This field is for validation purposes and should be left unchanged.